Expert Answers about Toyota Motorhome Chassis

• Replacement Lens and Housing for 1991 Winnebago Micro Mini Warrior
• Please look at the Low Profile RV Combination Tail Light w/ Mounting Bracket, # RVSTL61 and the RV Tail Light - Stop, Tail, Turn, License Plate - Black Base, # RVSTB61. Most all OEM's use the same venders for many of the parts on the coach they build on cutaway chassis, such as your 1991 Toyota Motorhome Chassis. The part numbers you provided did not pull anything up on our end but we should be able to locate something that will allow a retro fit unless you want an original factory install...
  view full answer...


• Can I Use the Bargman 30-85-002 to Replace the Tail Lights on my 1993 Winnabego warrior motorhome
• Yes. You can use the Bargman Triple Tail Light - 5 Function # 30-85-002 which has 5 wires, on the 4 wire system of your 1993 Winnebago Warrior. To do this you would just need to splice out the turn signal wire on your vehicle to allow you to provide power to the top two lights on the fixture and allow them to function properly. For reference, the green wires are going to be for the taillights and the running light circuit, the black wires are going to be our stop and turn signal, the white...
  view full answer...


• Is There a Replacement Ladder That Measures 12-1/2" Wide Center to Center of Vertical Poles
• The closest we have is the Surco Universal Exterior RV Ladder # SP502L which is 12" center to center of the vertical poles. We do not have a ladder matching the 12-1/2" center to center of your current ladder.
  view full answer...


• Replacement Entry Door Handle for 1990 Toyota Odyssey Camper
• I do have a solution, but we don't have a replacement for that exact door handle or any specific information on it. Based on the pictures I found, it looks like it uses your typical latch kit like the # 295-000019 which fits cutouts that are 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall. In some pictures it looked like they used a larger handle so the Bauer Products Rotary Latch # BA85FR might be more appropriate. This fits a 6" tall x 4" wide cutout. As long as you match the cutout or...
  view full answer...